show hardware card

 

 

show hardware card Command Output Descriptions

Field	Applicable Card(s)	Description
Card Type	All	The type of card installed.
Card Description	All	Displays the description assigned to the card during software configuration.
Part Number	All	The card’s part number. Cards of the same type and revision will have the same part number.
Serial Number	All	The card’s serial number.
Switch Fabric Modes	SMC, Processing Cards	Which Switch Fabric modes the card can do. Possible values are: • control plane • switch fabric
MAC Addresses	SMC, SPIO, and line cards	The media access control addresses supported by the interfaces on the cards.
Card Programmables	All	This field indicates if the software on any of the programmable components on the card is not at the current revision. • If all software is current, Up To Date is displayed. • If one or more components do not have the most current software, Out of Date is displayed, along with the component(s) requiring the newer code. • If one or more components have experimental or unreleased software, Experimental/Unreleased is displayed.
NPU Microcode	Processing Cards	The version of the software running (currently operational) on the Network Processing Unit (NPU).
Slave SCB	Processing Cards, SPIO, RCC, and line cards	The firmware version of the component that allows non-SMC cards to communicate with the SMC over the system control bus (SCB). on-card: Indicates the version of the firmware that is on the boot flash for the component.
SRM	SMC	The firmware version of the Status, Reset, and Monitoring component.
CIF FPGA	SMC	The firmware version of the Chassis Information (CIF) Field Programmable Gate Array (FPGA). • on-card: Indicates the version of the firmware that is on the boot flash for the component. • running: The firmware version that is currently operational.
PSR	Processing Cards	The firmware version of the Power, Status, and Reset component.
BIOS	Processing Cards, SMC	The version of the Basic Input/Output System (BIOS). on-card indicates the version of the firmware that on the boot flash for the component.
DT FPGA	Processing Cards	The firmware version of the Data Transport (DT) Field Programmable Gate Array (FPGA). • on-card: Indicates the version of the firmware that is on the boot flash for the component. • running: The firmware version that is currently operational.
FPGA	SPIO and line cards	The Field Programmable Gate Arrays that allow the SPIOs and other line cards to communicate with the SMC and Processing Cards respectively. on-card: Indicates the version of the firmware that is on the boot flash for the component.
CPU 0 through 3 Type / Memory	Processing Cards and SMC	The CPU’s pass (revision), speed and memory. The SMC only indicates CPU 0 because it has only one CPU. The Processing Cards display CPUs 0 and 1 because each card has two CPUs.
CPU 0 through 3 CFE / Diags	Processing Cards and SMC	The CPU’s Common Firmware Environment (CFU) and diagnostic software version. • on-card: Indicates the version of the firmware that is on the boot flash for the component. • running: The firmware version that is currently operational. The SMC only indicates CPU 0 because it has only one CPU. The Processing Cards display CPUs 0 and 1 because each card has two CPUs.
SFP Info	SPIO and Ethernet 1000 line cards and Quad Gig-E line card, 10 Gig Ethernet line card	Indicates information pertaining to the small form-factor pluggable (SFP) modules installed on the card. Among the information provided is the Manufacturer name, ID number, the module part and serial numbers, and the production date.

‌

 

 

Cisco Systems Inc.

Tel: 408-526-4000

Fax: 408-527-0883